[PDF] Programmable Logic Controllers Industrial Control

Authors of Programmable Logic Controllers Industrial Control

Khaled Kamel, Ph.D., is at the moment a professor of pc science at Texas Southern College. Beforehand, he was for 22 years a professor and the chair of the Division of Pc Engineering and Pc Science on the College of Louisville Engineering College.

He additionally labored as an instrumentation engineer at GE Jet Engine and served because the founding dean of the School of Data Know-how at United Arab Emirates College and of the School of Pc Science and Data Know-how at Abu Dhabi College.

Dr. Kamel acquired a B.S. in electrical engineering from Cairo College, a B.S. in arithmetic from Ain Shams College (Egypt), an M.S. in pc science from the College of Waterloo, and a Ph.D. in electrical and pc engineering from the College of Cincinnati.

Eman Kamel, Ph.D., holds a B.S. in electrical engineering from Cairo College, an M.S. in electrical and pc engineering from the College of Cincinnati, and a Ph.D. in industrial engineering from the College of Louisville.

She has in depth expertise in course of automation at firms together with Dow Chemical, GE Jet Engine, Philip Morris, VITOK Engineers, Evana Instruments, and PLC Automation.

She designed and carried out PLC-based automation tasks in utility areas together with tobacco manufacturing, chemical course of management, wastewater therapy, plastic sheets processing, and irrigation water degree management.

Dr. Kamel has wide-ranging experience in Siemens and Allen Bradley PLC programming, instrumentation, communication, and consumer interfaces.

She has taught lessons in the areas of PLCs, pc management, and automation at several universities.

Programmable Logic Controllers Contents

• Introduction to PLC Control Methods and Automation
• Fundamentals of PLC Logic Programming
• Timers and Counters Programming
• Math, Transfer, and
• Comparability Directions
• System Configuration and the Human-Machine Interface
• Course of-Control Design and Troubleshooting 
• Instrumentation and Course of Control
• Analog Programming and Superior Control
• Complete Case Research

Preface to Programmable Logic Controllers Industrial Control

Programmable Logic Controllers: Industrial Control affords readers an introduction to PLC programming, concentrating on actual industrial course of automation functions.

The Siemens S7-1200 PLC {hardware} configuration and the Completely Built-in Automation (TIA) Portal are used all through the e book.

A small and cheap coaching setup with a Siemens energy provide, processor, processor built-in discrete inputs-outputs, processor-integrated two-point analog inputs, processor one-output analog sign board, eight ON/OFF swap plug-in simulator

Human-machine interface (HMI), four-port Ethernet swap module and programming laptop computer are described and used as an instance all programming ideas and the implementation of components of automation tasks accomplished by the authors prior to now 15 years.

The authors drastically recognize the beneficiant assist of Siemens through the manufacturing of this e book, together with an knowledgeable technical assessment of the e book carried out by the corporate.

On the finish of every chapter is a set of homework questions and small laboratory design, programming, debugging, or upkeep tasks.

A complete capstone design challenge is detailed in Chap. 9, the ultimate chapter. All packages and system configurations used on this e book are totally carried out and examined.

The e book’s web site, www.mhprofessional.com/ProgrammableLogicControllers, accommodates a Microsoft PowerPoint multimedia presentation with a number of interactive simulators.

Readers are inspired to undergo the presentation and observe with the simulators to completely perceive the PLC programming fundamentals coated. An introduction to the ideas of course of management and automation is supplied in Chap. 1.

Chapter 2 particulars the basics of relay logic programming. It additionally covers the structure and operation of PLCs.

Configuration, operation, and the programming of timers and counters are the main focus of Chap. 3. The e book’s web site accommodates very helpful simulators for the several types of PLC timers: ON-DELAY, OFF-DELAY, and retentive timers.

The web site additionally accommodates further simulators illustrating ideas coated within the e book’s first three chapters, together with motor begin/cease and ahead/reverse management.

Chapter 4 is devoted to the protection of mathematical, logic, and generally used command operations, with emphasis on their use in real-time industrial functions.

Ladder programming for each PLC ladder logic and HMIs are mentioned intimately in Chap. 5. Modular structured programming design is introduced with emphasis on industrial requirements and security.

Protection is particular for the Siemens S7-1200 processor, the SIMATIC basic-panel HMI, and the PROFINET Ethernet protocol, however the ideas are relevant to different methods.

System checkouts and troubleshooting are usually essentially the most difficult and time-consuming duties in industrial automation process-control functions.

Chapter 6 accommodates frequent design and troubleshooting methods. It additionally addresses essential problems with validation, hazards, security requirements, and safety in opposition to {hardware}/ software program failures or malfunctions.

Analog programming and related instrumentation are coated in Chap. 7. Configuration, interface, scaling, calibration, and related consumer interfaces are briefly coated.

Chapter 8 presents a complete introduction to open- and closed-loop digital course of management. Subjects coated embrace sensors, actuators, ON/OFF management, suggestions management, PID tuning, and measures of excellent management.

This chapter is meant to give customers an understanding of the “large image” of a management system through system duties, necessities, and general expectations.

It could greatest serve superior engineering/know-how, pc science, or data know-how college students as a prerequisite for the basics and hands-on actions coated within the first seven chapters of the e book.

It can also serve different readers as a cap for the abilities realized in earlier chapters. The e book concludes with a complete case research in Chap. 9.

The case particulars the specs of an irrigation-canal downstream water-level management. Protection proceeds from the specification degree to the ultimate system design/implementation with related documentation.

The challenge is a small a part of a a lot bigger challenge carried out by the authors in an African nation greater than 10 years in the past.

All implementations are redone utilizing the Siemens S7-1200 PLC system. Current advances in industrial course of management have produced extra clever and compact PLC {hardware} than the one we adopted on this e book, the Siemens S7-1200 system.

These advances even have made out there extraordinarily friendlier growth software program for structured ladder programming, communication, configuration, modular design, documentation, and general system troubleshooting

And have created many alternatives for difficult and rewarding careers within the areas of PLC know-how and course of automation.

This e book is meant for a two-quarter sequence or one four-credit semester course in an educational setting with the expectation of weekly hands-on laboratory work actions.

It additionally can be utilized for a two-week industrial coaching sequence in a small-group setting with satisfactory coaching setup for customers.

Profitable profession alternatives within the demanding subject of PLC management and automation require the acquisition of the abilities on this e book together with satisfactory hands-on expertise.

Programmable logic controllers: industrial control PDF

Author(s): Kamel, Eman; Kamel, Khaled

Publisher: McGraw-Hill Education, Year: 2013

ISBN: 0-07-181045-5

Description:
A Complete, Hands-on Guide to Programmable Logic Controllers
Programmable Logic Controllers: Industrial Control offers a thorough introduction to PLC programming with focus on real-world industrial process automation applications. The Siemens S7-1200 PLC hardware configuration and the TIA Portal are used throughout the book. A small, inexpensive training setup illustrates all programming concepts and automation projects presented in the text. Each chapter contains a set of homework questions and concise laboratory design, programming, debugging, or maintenance projects. This practical resource concludes with comprehensive capstone design projects so you can immediately apply your new skills.

COVERAGE INCLUDES:

Introduction to PLC control systems and automation
Fundamentals of PLC logic programming
Timers and counters programming
Math, move, and comparison instructions
Device configuration and the human-machine interface (HMI)
Process-control design and troubleshooting
Instrumentation and process control
Analog programming and advanced control
Comprehensive case studies
End-of-chapter assignments with odd-numbered solutions available online
Online access to multimedia presentations and interactive PLC simulators

Download Programmable Logic Controllers Industrial Control PDF Free.